connection diagram
英 [kəˈnekʃn ˈdaɪəɡræm]
美 [kəˈnekʃn ˈdaɪəɡræm]
连接图，接线图
双语例句
- A wire is simply a connection in the assembly diagram that indicates which reference is connected to which component.
连线是指组装图中的连接，表示某个引用被连接到某个组件。 - The server connection diagram generated by our application appears as follows
该应用程序生成的服务器连接图如下所示 - Create a connection on our diagram.
在图表中创建连接。 - The following shows the steps involved in creating the server connection diagram
下图说明了创建服务器连接图的步骤 - Based on this study, this paper gives a formulator of epitaxy delta connection, draws the diagram of every voltage vector of the24-pulse system.
分析了24脉波整流各相序的电压矢量图，画出了24脉波的输出波形图。 - Connection point no.48as shown in circuit diagram.
连接点编号48，见电路图。 - Using heuristic depth-first search method, interference of components in a transmission connection diagram is judged A CAD system for design of transmission schemes of epicyclic boxes is developed The results given by the system are reasonable, so it could be used to design schemes of epicyclic boxes
采用启发式深度优先搜索方法来判断传动简图中构件的干涉，从而开发出一个行星变速箱传动方案CAD系统该系统设计结果合理，可用于行星变速箱的传动方案设计 - Designing the Scheme of Variable Connection Type Planetary Gearbox With 3-Degrees-of-Freedom Using Ratio Analytic Diagram
用传动比分析图设计换联式三自由度行星变速箱的方案 - The devices made up of these adaptable modules meet the requirements of the typical main connection diagram and operate with high reliability, self-adaptation and good economical performance.
由模块灵活组合构成的装置完全满足常见主接线的需求，并能保证可靠性、自适应性和经济性方面的要求。 - Referring to the connection diagram, several numbers can be listed, then taking their algebraic sum gets the connection group of three-phase transformer immediately.
它由连接图写出几个简单数字并取其代数和，就得到三相变压器的连接组别。 - With reference to the typical main connection diagram of mid-and low-voltage substations, the software and hardware design of automatic bus transfer device are simplified properly by applying the decomposition method in modularization.
本文结合中低压变电站常见的主接线，应用模块化的“分解”思路合理地简化了备自投装置软硬件的设计。 - The circuit diagram and wiring method of the apparatus are given out, which make it be able to do connection signal apparatus. In terms of the diagram to buy materials and connect, the apparatus can be made.
给出该装置的线路图和安装方法，使自制信号联络装置成为可能，按图购料连接，即可制成该装置。 - In OOA it includes Finding object and founding object class, Defining attribute and service, Defining structure and connection and Founding OOA basic model-class diagram.
在面向对象的分析中包括，发现对象、建立对象类，定义属性与服务，定义结构与连接，建立00A的基本模型类图。 - This paper introduces a control method of the automatic advertisement display device with micro-PLC, it also discusses about design method and design process of this control system. The control program and connection diagram are given.
介绍一种采用微型PLC控制多幅面广告展示设备的方法.阐述了该PLC控制系统的设计方法及设计步骤，并给出了相应的控制程序及接线图。 - Considering each bitmap unit as vertex and topological connection between bitmap units as arc, ladder diagram is separated into independent AOV diagrams.
视梯形图图符为顶点，图符与图符间的拓扑连接为弧，将梯形图划分为一系列独立的AOV图。 - Automatic analysis program of topological structure for hydraulic schematic diagram was designed to extract the parameter values and connection between components in a hydraulic system schematic diagram and build the data file.
设计了原理图拓扑结构自动识别程序，能够自动提取液压原理图中元件的参数及相互间的连接关系，并生成数据文件。 - This paper provided the principle diagram of electric control and the connection diagram of PLC control hardware, and analysed the control software design.
给出了电气控制原理图，PLC控制硬件接线图，并对控制软件设计进行分析。 - By doing it, the problem of the connection between the part and the whole of circuit diagram is solved.
不仅解决了电路图局部效果与整体联系问题。 - The knowledge inference method of the general network modeling with graphic interface is introduced, in which the system model is gradually inferred from the visual system connection diagram.
提出了一种符合图形界面下建立通用电网模型的知识推理方法。由可视化的系统接线图图形逐步推出系统模型。 - The hardware partially produced S3C44B0X to expand CAN controller SJA1000 the connection schematic diagram, with LCD demonstration module recommendation connection;
硬件部分给出了S3C44B0X扩展CAN控制器SJA1000的接口原理图，和LCD显示模块的推荐接法； - These results are discussed in connection with various factors such as composition, phase diagram, melting point, interatomic force and e/ a effecting the stability of amorphous alloys.
对这些实验规律，从组份、相图、熔点、原子间的结合作用、e/a等进行了讨论。 - In application of possible fault components set and fault components connection diagram, the model can quickly adapt to variations of power system operating modes.
可疑故障元件库和故障元件连接图的应用使得该模型能够快速适应电力系统运行方式的变化。 - Using ladder language, Describes the elevator control system, called the registration response signal, Clearance and other aspects of the logic implementation, Put forward elevator control system hardware connection diagram and its Address Assignment.
利用梯形图语言，描述了电梯控制系统中召唤信号登记响应及清除功能等各方面的逻辑实现，提出了电梯控制系统硬件连接图及其地址分配。 - By basing on analyzing the model of data path connection diagram, we provide a sequence of definition about data path niter-connect diagram, and then present an IU-Allocation algorithm.
在着重分析数据通路连接图的表示模型的基础上，对数据通路连接图的标准型给出了一系列定义，然后提出了IU-Allocation算法。 - Finally, the top-level connection diagram of all modules has been shown and passed the timing simulation.
最后给出所有模块的顶层连接图，并通过了整体的时序仿真验证。 - The author chooses the component according to the actual need, definite the module and the function, designs the electric circuit connection of each module, completes the schematic diagram and the PCB, as well as make the hardware.
根据检测实际需要选择器件，确定模块与功能划分，并设计各个模块的电路接口，完成原理图与PCB版图的绘制以及硬件制作。 - In the end, introduced work principle and structure characteristics of the PLC programmable logical control system, instance to PLC hardware connection diagram, according to the inflation make sure by this text control scheme to process control flow chart.
最后，介绍了PLC可编程逻辑控制系统的工作原理和结构特点，给出了PLC的硬件接线图，根据本文所确定的充气控制方案给出了程序控制流程图。 - The electrical drive components of the system were calculated to pick up, including spindle inverters, AC servo drives, AC servo motor. And the connection diagram of the hardware system was completed.
对系统电气驱动部件如主轴变频器、交流伺服驱动器、交流伺服电机等进行了计算选取，设计完成了硬件系统连接图。 - Analysis to determine the amount charged by a programmable control system, select the PLC, the design I/ O points, draw the I/ O connection diagram and wiring diagram of the external instrument.
分析被控量确定系统采用可编程的控制方法，选择PLC，设计I/O点，画出I/O连接图和仪表的外部接线图。 - Analyzed the design objectives, and defined the input and output signal of the module. Then further divided its sub-modules and analyzed its internal signals, and present a complete module and signal connection diagram as well as detailed registers settings.
首先分析设计目标，定义了模块外围的接口；进而根据设计功能划分子模块，进一步分析其内部互连信号，给出了完整的子模块和信号连接图，以及详细的端口连接和寄存器的设置。